Rain Harvesting
-
100mm Sliding Gate Valve (Plastic Paddle)
$156.00
Versatile in its application, the Sliding Gate Valve fits 100mm pipes and allows water flow to be shut off.
Suitable for low pressure applications (sealing pressure rated to 210kPa).
The plastic paddle sliding gate valve is designed for completely draining a system.For example, completely emptying a charged rainwater harvesting system. It can shut off water mid flow up to 5kPa.
For applications where it is a requirement to shut off against a much high pressure, view the Stainless Steel Paddle Sliding Gate Valve.
DWV and Stormwater pipe fitment
-
100mm Sliding Gate Valve (Stainless Steel Paddle)
$192.40
Versatile in its application, the Sliding Gate Valve fits 100mm pipes and allows water flow to be shut off.
Suitable for low pressure applications (sealing pressure rated to 210kPa).
Stainless Steel Paddle has the strength to close off during mid flow (max closing pressure 60kPa).
Ideal for applications where an active water flow needs to be shut-off or diverted.
DWV and Stormwater pipe fitment
Download the Installation and Specification Guide here -
100mm Sliding Gate Valve Pressure (Stainless Steel Paddle)
$193.81
Versatile in its application, the Sliding Gate Valve fits 100mm pipes and allows water flow to be shut off.
Suitable for low pressure applications (sealing pressure rated to 210kPa).
Stainless Steel Paddle has the strength to close off during mid flow (max closing pressure 60kPa).
Ideal for applications where an active water flow needs to be shut-off or diverted.
Pressure pipe fitment
-
100mm Standard Overflow (Corrugated Straight Wall)
$5.25
The flange provides an ample surface for sealant and fasteners, and the standard fitting matches with our range of mosquito proof screens and standard plumbing fittings. -
3-Way Water Diverter 100mm
$45.36
Divert water quickly in non pressurised systems with this easy to use water diverter. -
3-Way Water Diverter 50mm
$23.54
Easily divert and distribute the water from
your shower, hand basins, laundry and
downpipes onto your garden with the
Water Diverter. -
3-Way Water Diverter 90mm
$32.99
Easily divert and distribute the water from your shower, hand basins, laundry and downpipes onto your garden with the Water Diverter.
-
300mm First Flush Chamber Pipe - 1 mtr length
$75.24
If you're installing a 300mm diameter First Flush Diverter - this is the pipe you will need to create the chamber. Available in a range of lengths to suit your needs. -
300mm First Flush Chamber Pipe - 1.5mtr length
$112.86
If you're installing a 300mm diameter First Flush Diverter - this is the pipe you will need to create the chamber. Available in a range of lengths to suit your needs. -
300mm First Flush Chamber Pipe - 1.9mtr length
$142.95
If you're installing a 300mm diameter First Flush Diverter - this is the pipe you will need to create the chamber. Available in a range of lengths to suit your needs. -
400mm Easy Fit Clip-On Tank Cover M
$17.50
A Tank Cover minimises algae contamination by stopping sunlight from entering your tank through the inlet screen.
The 400mm Easy Fit Clip-on Tank Cover is a component of the 400mm Easy Fit Clip-On Tank Screen System.
The 400mm Easy Fit Clip-On Tank Screen System is a screw-less, clip-on tank screen system for your tank inlet. It keeps mosquitoes and pests from entering your 400mm tank inlets without interrupting the flow of water into your tank. This system is easy to install and maintain. No tools required.
Note: This product is compatible with metal rainwater tanks with a top panel thickness of 0.6mm, and an inlet hole diameter of 375mm +/-5mm.
-
400mm Easy Fit Clip-On Tank Screen M (ALU Mesh)
$20.50
Tank Screens are the final barrier for keeping leaves, debris, mosquitoes and other pests out of your rainwater. Keeping these contaminants out helps to protect the quality of the water you collect.
The 400mm Easy Fit Clip-on Tank Screen (Aluminium) is a component of the 400mm Easy Fit Clip-On Tank Screen System.
The 400mm Easy Fit Clip-On Tank Screen System is a screw-less, clip-on tank screen system for your tank inlet. It keeps mosquitoes and pests from entering your 400mm tank inlets without interrupting the flow of water into your tank. This system is easy to install and maintain. No tools required.
Note: This product is compatible with metal rainwater tanks with a top panel thickness of 0.6mm, and an inlet hole diameter of 375mm +/-5mm.
-
400mm Easy Fit Tank Inlet Ring M
$9.50
The 400mm Easy Fit Tank Inlet Ring fits into 400mm metal tank inlets and provides the base for all other components of the 400mm Easy Fit Clip-On Tank Screen System to be clipped onto.
The 400mm Easy Fit Clip-On Tank Screen System is a screw-less, clip-on tank screen system for your tank inlet. It keeps mosquitoes and pests from entering your 400mm tank inlets without interrupting the flow of water into your tank. This system is easy to install and maintain. No tools required.
Note: This product is compatible with metal rainwater tanks with a top panel thickness of 0.6mm, and an inlet hole diameter of 375mm +/-5mm.
-
400mm/16" Easy Fit Solar Shield M
$20.50
Designed to fit under your tank screen, the Solar Shield’s patented design maximises the flow of rainwater into your tank while keeping sunlight out to prevent algae.
The 400mm Easy Fit Solar Shield is a component of the 400mm Easy Fit Clip-On Tank Screen System.
The 400mm Easy Fit Clip-On Tank Screen System is a screw-less, clip-on tank screen system for your tank inlet. It keeps mosquitoes and pests from entering your 400mm tank inlets without interrupting the flow of water into your tank. This system is easy to install and maintain. No tools required.
Note: This product is compatible with metal rainwater tanks with a top panel thickness of 0.6mm, and an inlet hole diameter of 375mm +/-5mm.
Download the Installation and Specification Guide here -
44mm Easy Fit Grommet
$5.00
Tank Cover Grommets provide a flexible, mosquito-proof pass through option for submersible pump power cables and pressure pipes.
The 44mm Easy Fit Tank Cover Grommet is a component of the 400mm Easy Fit Clip-On Tank Screen System.
The 400mm Easy Fit Clip-On Tank Screen System is a screw-less, clip-on tank screen system for your tank inlet. It keeps mosquitoes and pests from entering your 400mm tank inlets without interrupting the flow of water into your tank. This system is easy to install and maintain. No tools required.
Note: This product is compatible with metal rainwater tanks with a top panel thickness of 0.6mm, and an inlet hole diameter of 375mm +/-5mm.
-
500mm Tank Screen 360 Adaptor
$25.27
Tank Screen 360 Adaptor Ring for upsizing 400mm to 500mm. -
90mm Mozzie Stoppa Easy Clean (socket fitment)
$10.40
Protect your rainwater quality by keeping mosquitoes and other pests out of your tank with this Mozzie Stoppa Easy-Clean, spring-loaded hinge mosquito-proof outlet screen.
Download the Installation and Specification Guide here -
90mm Pipe to 100mm x 50mm Rectangular Socket Adaptor
$3.64
-
90mm Pipe to 100mm x 75mm Rectangular Socket Adaptor
$3.54
-
90mm Sliding Gate Valve (Plastic Paddle)
$65.30
Versatile in its application, the Sliding Gate Valve fits 90mm pipes and allows water flow to be shut off.
Suitable for low pressure applications (sealing pressure rated to 210kPa).
The plastic paddle sliding gate valve is designed for completely draining a system. For example, completely emptying a charged rainwater harvesting system. It can shut off water mid flow up to 5kPa.
For applications where it is a requirement to shut off against a much high pressure, view the Stainless Steel Paddle Sliding Gate Valve.
Suits 90mm Stormwater Pipe
Download the Installation and Specification Guide here -
90mm Sliding Gate Valve (Stainless Steel Paddle)
$94.44
Versatile in its application, the Sliding Gate Valve fits 90mm pipes and allows water flow to be shut off.
Suitable for low pressure applications (sealing pressure rated to 210kPa).
Stainless Steel Paddle has the strength to close off during mid flow (max closing pressure 60kPa).
Ideal for applications where an active water flow needs to be shut-off or diverted.
Suits 90mm Stormwater Pipe.
-
Air Gap 100mm
$54.50
Protect your rainwater from contamination by preventing stormwater backflow – and mosquitoes – entering your tank through your outlet pipes. Includes two removable insect proof screens for easy cleaning.
-
Air Gap 90mm
$22.64
Air Gaps prevent stormwater backflow from entering your rainwater tank and lowering your water quality.
If there is a stormwater backup, water can flow up your overflow pipe. Having the physical break in the air gap means that this contaminated water cannot make the jump into your tank. It will instead flow out of the opening. Think of it as the circuit breaker for your tank!
-
Air Gap 90mm Face Shield
$4.86
Anti splash face shield for the 90mm Air Gap.
-
Automatic Tank Vacuum Concrete 90mm
$27.23
Save on tank cleaning and protect your rainwater quality by automatically drawing sediment out of your tank whenever it overflows.
-
Automatic Tank Vacuum Flat Wall 90mm
$27.23
Save on tank cleaning and protect your rainwater quality by automatically drawing sediment out of your tank whenever it overflows.
Download the Installation and Specification Guide here -
Calmed Inlet 100mm/ 4"
$45.00
Avoid sediment resuspension in your rainwater by using the Calmed Inlet. Water entering your tank at a high flow rate can resuspend any sediment or dirt that has settled on the floor of the tank back into your rainwater.
The Calmed Inlet allows water to enter your tank or rain barrel calmly, so that it doesn’t create turbulence and cause sediment resuspension.
Ideal for tanks or barrels that don’t use a screen or cover, the Calmed Inlet will help to oxygenate the rainwater in the lower area of your tank. This reduces anaerobic fermentation and keeps your water at its best. The result is cleaner and sediment-free water drawn directly from your tank or rain barrel. -
Carrot Total Rain 90mm
$135.45
The Total Rain is an all-in-one solution which combines the sleek design of the Leaf Eater Stream rain head with The Carrot First Flush Diverter. The rain head filters leaves and debris while the first flush diverter diverts the most contaminated water from your roof away from your rainwater tank.
The easiest way to filter your water before it enters your tank.
-
Clean Rain Advanced
$76.36
An all-in-one rainwater diverter which incorporates a rain head and first flush diverter to ensure clean water is diverted to your rainwater tank, rain barrel, pool or garden.
-
Clean Rain Hydroscopic Washer Set
$9.68
Clean Rain Ultra or Clean Rain Advanced hydroscopic washer replacement set. 46 washers per set.
-
Clean Rain Ultra
$86.10
An all-in-one rainwater diverter which incorporates a rain head and first flush diverter to ensure clean water is diverted to your rainwater tank, rain barrel, pool or garden. The integrated cover and cap provide a stylish finish.
-
Clean Shield Screen for Leaf Beater
$16.02
Upgrade your Leaf Beater rain heads with this leaf-shedding, mosquito-proof, easy-clean replacement clean shield screen.
-
Clean Shield Screen for Leaf Eater Original
$16.02
Upgrade your Leaf Eater Original or Leaf Eater Plus with this mosquito-proof screen for improved leaf-shedding and easier maintenance.
-
Downpipe Diverter Hose Kit
$27.22
The Downpipe Diverter Hose Kit allows you to connect your downpipe diverter to your rain barrel so you can start collecting water quickly and easily.
Download the Installation and Specification Guide here
-
Downpipe Diverter Rectangular 100x50/100x75mm
$45.41
The Rectangular Downpipe Diverter captures the water flowing through your downpipes, while filtering leaves and debris – giving you lots of great quality rainwater. It's the easiest way to start collecting water today. -
Downpipe Diverter Round 90mm
$35.88
The Downpipe Diverter Round captures the water flowing through your downpipes, while filtering leaves and debris – giving you lots of great quality rainwater. It's the easiest way to start collecting water today.
-
Downpipe Interceptor 90mm
$25.36
The Downpipe Interceptor is an ingeniously simple yet highly effective tool that helps you control the flow of rainwater from your roof to your tank. At first glance, it's a normal downpipe fitting, but its true power lies in its rotating middle section. With an effortless twist, the water flow is diverted away from the downpipe, saving your tank from unwanted pollutants. -
Easy Fit Tank Screen SS Cover Kit with Easy Fit Screw Down Inlet Ring (Poly Tank) 400mm / 16 inch
$55.45
Suitable for any tank type, this tank screen system requires no tools for maintenance. It means you can easily remove and clean your tank screen to keep it clean and functioning smoothly. The kit includes a Tank Screen Cover, which shields your tank from sunlight, reducing algae growth.
-
Easy Fit Tank Screen SS Kit with Easy Fit Screw Down Inlet Ring (Poly Tank) 400mm / 16 inch
$36.36
Suitable for any tank type, this tank screen system requires no tools for maintenance. It means you can easily remove and clean your tank screen to keep it clean and functioning smoothly. The modular system allows other components to be easily clipped into position to further boost your tank's performance. Add on covers, or solar shields to protect your water further.
-
Easy Fit Tank Screen SS Solar Shield Kit w/ Easy Fit Screw Down Inlet Ring (Poly Tank) 400mm/16inch
$58.64
Suitable for any tank type, this tank screen system requires no tools for maintenance. It means you can easily remove and clean your tank screen to keep it clean and functioning smoothly. The kit includes a Solar Shield, which shields your tank from sunlight, reducing algae growth.
-
Electronic Release Valve (Battery)
$56.73
Take control over how frequently your first flush diverters empty and prevent clogging to minimise maintenance and improve your diverters’ performance.
-
Fire Plug
$71.19
Help defend your home against bushfire attack
- Backfill your gutters with water to defend against ember attack.
- Easily install on a 90mm downpipe.
- Just close the valve and connect a hose to fill your downpipe and gutters.
- Simply open the valve to release the water.
The Fire Plug is a multi purpose valve system which also lets you:
Divert water
- Shut off your downpipe off, and connect a hose to capture and use the water flowing from your gutters.
Clean your gutters
- Shut your downpipe off to prevent water flowing to your tank while you clean your roof and gutters
-
First Flush 90mm with Max Chamber 100mm and Catch-All Tee
$56.63
The Max Chamber increases the volume of water you can catch in a smaller area – thanks to its large diameter chamber. It means you can divert more water with less space, giving you the flexibility to fine tune your system easily.We've also included the Catch-All Tee to ensure no water skips across the tee until the first flush of water is complete – which means you only capture the best quality water.
-
First Flush 90mm with Max Chamber Style 100mm, Catch-All Tee and Electronic Release Valve (battery)
$103.91
The Max Chamber increases the volume of water you can catch in a smaller area – thanks to its large diameter chamber. It means you can divert more water with less space, giving you the flexibility to finetune your system easily.We've also included the Catch-All Tee to ensure you only catch the best quality water, and the Electronic Release Valve to give you the ultimate control over how regularly your First Flush Diverter activates.
Download the Installation and Specification Guide here
-
First Flush Carrot 100mm
$108.08
Divert your initial roof runoff without the need for a traditional First Flush storage chamber and ensure only the cleanest water reaches your tank.It does not require a chamber (unlike traditional First Flush Diverters) which makes installation easy. It takes up less space and looks great on your wall.
-
First Flush Carrot 90mm
$90.00
Divert your initial roof runoff without the need for a traditional First Flush storage chamber and ensure only the cleanest water reaches your tank.
The First Flush Carrot uses a clever mechanism to measure and discard the first flush of water, and then seals off to send the best water to your tank.
The compact design allows the unit to be installed in tight spots and is supplied in an all inclusive kit.
-
First Flush Chamber Style and Catch-All Tee 100mm
$71.76
Protect your rainwater quality by diverting the most contaminated water that washes off your roof with the first few millimetres of rainfall with a First Flush Diverter.We've included the Catch-All Tee to ensure no water skips across the tee until the first flush of water is complete – which means you only capture the best quality water. It's a great step up from the Basic Tee.
Download the Installation and Specification Guide here
-
First Flush Chamber Style with Basic Tee 100mm
$65.23
Protect your rainwater quality by diverting the most contaminated water that washes off your roof with the first few millimetres of rainfall with a First Flush Diverter.This First Flush Diverter is the original in our range and is a great way to get started with first flush diversion.
Download the Installation and Specification Guide here
